March 30, 2009

Model Analyzer Registration

Hi,
Everyone who has downloaded the today’s giveaway Model Analyzer and has some trouble with the registration will be able to register this software during the next two days.
Sorry for the inconvenience.
GOTD Team

25 Comments »

  1. Have tried about 20 times to register this product on their site. Keeps coming back with error message to check my internet connection … but no problem there. Have tried to register online from their site also … NO Luck!!!!!

    Comment by Warren Koch — March 30th, 2009 at 2:20 pm
  2. OK great, it wasn’t just me then! :)
    =

    Comment by whappo — March 30th, 2009 at 4:52 pm
  3. Tell people to make sure that Excel is closed when you go to register the program.

    Comment by Joe — March 30th, 2009 at 5:33 pm
  4. Order Number: 263977855

    Comment by yur — March 30th, 2009 at 6:03 pm
  5. After I install I cannot find the application to run it. It isnot in the folder.Also register application keeps telling me I’m not on line ?????

    Comment by Joe Livorno — March 30th, 2009 at 7:49 pm
  6. I keep receiving the following message: Check my internet connection. I am unable to register this product, and I am so glad that you are looking into this issue and will allow us two days to get this straightened out.

    Comment by Kimberly — March 30th, 2009 at 8:28 pm
  7. cannot register model analyzer. please assist. thanks.

    Comment by Ray Brooks — March 31st, 2009 at 1:44 am
  8. finally got the program registered after trying four times with [] around the email address. thanks

    Comment by Ray Brooks — March 31st, 2009 at 1:54 am
  9. Although I attempted all day, I was unable to register this software. I kept getting error message, unable to connect to the Internet, which wasn’t the case at all.

    Comment by AC — March 31st, 2009 at 2:08 am
  10. I’m trying to register the Excel add-on today as your comment indicates is allowed, but I am receiving a message that they haven’t received the invoice yet.

    Comment by AZGamer — March 31st, 2009 at 7:17 pm
  11. tried to register today, 3/31/09.

    got this message:

    “Dear customer,
    If you see this message is because we have not received your invoice yet.
    In some cases it delays more. But don’t worry it will arrive about the next hours.
    If you need further assistance, contact us at: support@jabsoft.com

    what does this mean???

    Comment by James — March 31st, 2009 at 9:36 pm
  12. So now I get a dialog box about not seeing my invoice yet and they will get around to it blah blah. So the end result is that it still isn’t registering.

    Comment by gmon — April 1st, 2009 at 5:51 am
  13. Apologies for the inconveniences to register our product: Model Analyzer for Excel.
    This issue was due to huge concurrence by many users trying to register to same time, but now it is a little light

    We have built a new special Order Number: EXT-263977855

    Please, take into account that this new Order Number will expire at 22:00 hours (GMT)

    Thank you very much for your interest in our products.

  14. I tried to register several times and got errors about the internet conenction.

    Went through the alternate code and haven’t heard back.

    Bit of a rip-off, as I was actually keen to use the Excel add0in.

    – jf

    Comment by james — April 3rd, 2009 at 11:03 am
  15. i have mail to jabsoft because my registration said i ve registered but the application has disappeared of excel and was always on trial
    please help me because they are not answer me and i wish very more this log
    thanks a lot
    tymu

    Comment by tymu — April 5th, 2009 at 9:04 am
  16. I have also been getting no joy trying to register this. Started with “no internet connection” and progressed to “you have not sent us an invoice”. I saw Jabsoft’s posting about the new code and the limited window to use it after it expired. So I am still getting “no invoice”.

    I was not checking this everyday. I expected some more obvious announcement and a little more leeway in registering this, considering how badly the system behaved. Guess not.

    Please advise where to send the invoice. I will bill you for the time I wasted.

    JK

    Comment by JKEngineer — April 5th, 2009 at 10:05 am
  17. worked for me. dunno what ur prob is JK :)

  18. Hello,

    I had all the problems folks mention here; complains about my internet connection, messages about invoices and so forth.

    I simply could not get this to work, but left it installed just in case. When I saw this blog entry yesterday I tried to run the “Model Analyzer” and now I am not sure if it is working in demo mode or in full registered mode.

    I am not too keen to check “Register Model Assistant Suite” because I don’t know if “Model Assistant Suite” is the same as “Model Analyzer” or maybe lose the license.

    Is there a simple way to check if “Model Analyzer” is fully registered? I would really appreciate any help.

    AxCut

    Comment by AxCut — April 8th, 2009 at 5:43 pm
  19. @#18: Hear, hear. I am in the dark on this issue, as well. Maybe Jabsoft should offer Model Analyzer on GAOTD again sometime soon to make up for the recent experience .. :)

    Comment by Oskar — April 10th, 2009 at 9:25 am
  20. sorry to hear that #19. I agree, a repeat would be nice.

    Comment by AxCut — April 11th, 2009 at 10:33 pm
  21. Just as I feared. On comment #18 on this blog I stated my fears about this software. I asked a very simple question and nobody bother to answer. Today, 15 days after the software was installed, it won’t run anymore. I

    On April 8th, I search high and low about “Model Analyzer” status as fully registered or not. I asked a very simple question

    Is there a simple way to check if “Model Analyzer” is fully registered?

    Nobody bother to answer and today, 15 days after it was installed, I tried to run it and it WAS a trial version.

    There was

    Comment by AxCut — April 16th, 2009 at 2:14 am
  22. I don’t know how today’s previous post was sent. My mouse was never near the ‘submit comment’ link! That post doesn’t make sense because I had no time to finish writing it when it decided to send itself but if it is posted (I seriously doubt it will) it is clear that I am complaining about Model Analyzer.

    In post #18 I expressed concerns about the status of my registration, concerns that went unanswered. I interpreted the lack of response to my simple question as an statement to the fact that I was running a full copy.

    That turned out to be a big mistake on my part because as a result of that interpretation I have lost 10 days of work. Today, 15 days after Model Analyzer for Excel was offered, it went to trial mode.

    Most software I use makes it clear whether it is running in demo mode (or limited version) or not. Model Analyzer for Excel does not. I was able to use it for 10 days without a warning or a message, so I assumed all was okay.

    Had I known that the copy I installed was not fully registered, I would have searched and found this Blog entry (or for that matter the messages posted in the forums) in time to ensure I had a fully registered copy. Think about it, if the software is running fine, why would I look for a way to fix it?

    I like GAOTD. People tend to help each other and once in a while (like in this case) the developers get involved too. I am not upset about the fact that I don’t have the software. Frankly, I can’t afford it but I found it useful to manage for my meager finances.

    I know there is no way I can recover my work at this point in time when all the time windows that the developers offered to folks who knew they did not have a fully registered program are closed.

    If my loss of my time and effort had been caused by me, I wouldn’t even be writing this comment, but the developers clearly explained that they couldn’t handle all the registrations due to an unexpected high volume of queries and therefore some folks never had a chance to register it.

    I suspect that this message will be ignored; for all I know it may not even be posted but if it is, maybe somebody will read it and be better prepared to handle these kind of situations without a large waste of time and effort.

    AxCut

    Comment by AxCut — April 16th, 2009 at 3:15 am
  23. Like others, I didn’t want a trial version. I hardly call this a “give away”! It’s a good thing I didn’t rely on this application for any mission-critical work. My biggest regret is that I passed along the “give away” information to friends and family, who were also disappointed.

    Also, several people had to uninstall it because it completely messed up cut/copy/paste functionality to-from Excel and other applications.

    Comment by Ken Shaw — April 24th, 2009 at 8:06 am
  24. I also have problems with cut-copy-paste functionality since I installed this !!!

  25. me too :(

Leave a comment

© 2006 - 2024 giveawayoftheday.com. All rights reserved. Patent Pending. Powered by WordPress.