Comments on: Model Analyzer Registration http://blog.giveawayoftheday.com/model-analyzer-registration/ Fri, 20 Nov 2009 04:20:16 -0500 http://wordpress.org/?v=2.8.5 hourly 1 By: eskimo http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-59757 eskimo Sun, 24 May 2009 08:50:31 +0000 http://blog.giveawayoftheday.com/?p=78#comment-59757 me too :( me too :(

]]> By: carlos http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-57292 carlos Wed, 06 May 2009 10:48:30 +0000 http://blog.giveawayoftheday.com/?p=78#comment-57292 I also have problems with cut-copy-paste functionality since I installed this !!! I also have problems with cut-copy-paste functionality since I installed this !!!

]]> By: Ken Shaw http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-56036 Ken Shaw Fri, 24 Apr 2009 12:06:26 +0000 http://blog.giveawayoftheday.com/?p=78#comment-56036 Like others, I didn't want a trial version. I hardly call this a "give away"! It's a good thing I didn't rely on this application for any mission-critical work. My biggest regret is that I passed along the "give away" information to friends and family, who were also disappointed. Also, several people had to uninstall it because it completely messed up cut/copy/paste functionality to-from Excel and other applications. Like others, I didn’t want a trial version. I hardly call this a “give away”! It’s a good thing I didn’t rely on this application for any mission-critical work. My biggest regret is that I passed along the “give away” information to friends and family, who were also disappointed.

Also, several people had to uninstall it because it completely messed up cut/copy/paste functionality to-from Excel and other applications.

]]> By: AxCut http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-54925 AxCut Thu, 16 Apr 2009 07:15:40 +0000 http://blog.giveawayoftheday.com/?p=78#comment-54925 I don't know how today's previous post was sent. My mouse was never near the 'submit comment' link! That post doesn't make sense because I had no time to finish writing it when it decided to send itself but if it is posted (I seriously doubt it will) it is clear that I am complaining about Model Analyzer. In post #18 I expressed concerns about the status of my registration, concerns that went unanswered. I interpreted the lack of response to my simple question as an statement to the fact that I was running a full copy. That turned out to be a big mistake on my part because as a result of that interpretation I have lost 10 days of work. Today, 15 days after Model Analyzer for Excel was offered, it went to trial mode. Most software I use makes it clear whether it is running in demo mode (or limited version) or not. Model Analyzer for Excel does not. I was able to use it for 10 days without a warning or a message, so I assumed all was okay. Had I known that the copy I installed was not fully registered, I would have searched and found this Blog entry (or for that matter the messages posted in the forums) in time to ensure I had a fully registered copy. Think about it, if the software is running fine, why would I look for a way to fix it? I like GAOTD. People tend to help each other and once in a while (like in this case) the developers get involved too. I am not upset about the fact that I don't have the software. Frankly, I can't afford it but I found it useful to manage for my meager finances. I know there is no way I can recover my work at this point in time when all the time windows that the developers offered to folks who knew they did not have a fully registered program are closed. If my loss of my time and effort had been caused by me, I wouldn't even be writing this comment, but the developers clearly explained that they couldn't handle all the registrations due to an unexpected high volume of queries and therefore some folks never had a chance to register it. I suspect that this message will be ignored; for all I know it may not even be posted but if it is, maybe somebody will read it and be better prepared to handle these kind of situations without a large waste of time and effort. AxCut I don’t know how today’s previous post was sent. My mouse was never near the ’submit comment’ link! That post doesn’t make sense because I had no time to finish writing it when it decided to send itself but if it is posted (I seriously doubt it will) it is clear that I am complaining about Model Analyzer.

In post #18 I expressed concerns about the status of my registration, concerns that went unanswered. I interpreted the lack of response to my simple question as an statement to the fact that I was running a full copy.

That turned out to be a big mistake on my part because as a result of that interpretation I have lost 10 days of work. Today, 15 days after Model Analyzer for Excel was offered, it went to trial mode.

Most software I use makes it clear whether it is running in demo mode (or limited version) or not. Model Analyzer for Excel does not. I was able to use it for 10 days without a warning or a message, so I assumed all was okay.

Had I known that the copy I installed was not fully registered, I would have searched and found this Blog entry (or for that matter the messages posted in the forums) in time to ensure I had a fully registered copy. Think about it, if the software is running fine, why would I look for a way to fix it?

I like GAOTD. People tend to help each other and once in a while (like in this case) the developers get involved too. I am not upset about the fact that I don’t have the software. Frankly, I can’t afford it but I found it useful to manage for my meager finances.

I know there is no way I can recover my work at this point in time when all the time windows that the developers offered to folks who knew they did not have a fully registered program are closed.

If my loss of my time and effort had been caused by me, I wouldn’t even be writing this comment, but the developers clearly explained that they couldn’t handle all the registrations due to an unexpected high volume of queries and therefore some folks never had a chance to register it.

I suspect that this message will be ignored; for all I know it may not even be posted but if it is, maybe somebody will read it and be better prepared to handle these kind of situations without a large waste of time and effort.

AxCut

]]> By: AxCut http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-54913 AxCut Thu, 16 Apr 2009 06:14:26 +0000 http://blog.giveawayoftheday.com/?p=78#comment-54913 Just as I feared. On comment #18 on this blog I stated my fears about this software. I asked a very simple question and nobody bother to answer. Today, 15 days after the software was installed, it won't run anymore. I On April 8th, I search high and low about "Model Analyzer" status as fully registered or not. I asked a very simple question Is there a simple way to check if “Model Analyzer” is fully registered? Nobody bother to answer and today, 15 days after it was installed, I tried to run it and it WAS a trial version. There was Just as I feared. On comment #18 on this blog I stated my fears about this software. I asked a very simple question and nobody bother to answer. Today, 15 days after the software was installed, it won’t run anymore. I

On April 8th, I search high and low about “Model Analyzer” status as fully registered or not. I asked a very simple question

Is there a simple way to check if “Model Analyzer” is fully registered?

Nobody bother to answer and today, 15 days after it was installed, I tried to run it and it WAS a trial version.

There was

]]> By: AxCut http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-54150 AxCut Sun, 12 Apr 2009 02:33:53 +0000 http://blog.giveawayoftheday.com/?p=78#comment-54150 sorry to hear that #19. I agree, a repeat would be nice. sorry to hear that #19. I agree, a repeat would be nice.

]]> By: Oskar http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-53829 Oskar Fri, 10 Apr 2009 13:25:07 +0000 http://blog.giveawayoftheday.com/?p=78#comment-53829 @#18: Hear, hear. I am in the dark on this issue, as well. Maybe Jabsoft should offer Model Analyzer on GAOTD again sometime soon to make up for the recent experience .. :) @#18: Hear, hear. I am in the dark on this issue, as well. Maybe Jabsoft should offer Model Analyzer on GAOTD again sometime soon to make up for the recent experience .. :)

]]> By: AxCut http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-53568 AxCut Wed, 08 Apr 2009 21:43:08 +0000 http://blog.giveawayoftheday.com/?p=78#comment-53568 Hello, I had all the problems folks mention here; complains about my internet connection, messages about invoices and so forth. I simply could not get this to work, but left it installed just in case. When I saw this blog entry yesterday I tried to run the "Model Analyzer" and now I am not sure if it is working in demo mode or in full registered mode. I am not too keen to check "Register Model Assistant Suite" because I don't know if "Model Assistant Suite" is the same as "Model Analyzer" or maybe lose the license. Is there a simple way to check if "Model Analyzer" is fully registered? I would really appreciate any help. AxCut Hello,

I had all the problems folks mention here; complains about my internet connection, messages about invoices and so forth.

I simply could not get this to work, but left it installed just in case. When I saw this blog entry yesterday I tried to run the “Model Analyzer” and now I am not sure if it is working in demo mode or in full registered mode.

I am not too keen to check “Register Model Assistant Suite” because I don’t know if “Model Assistant Suite” is the same as “Model Analyzer” or maybe lose the license.

Is there a simple way to check if “Model Analyzer” is fully registered? I would really appreciate any help.

AxCut

]]> By: roberto http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-53347 roberto Tue, 07 Apr 2009 14:40:14 +0000 http://blog.giveawayoftheday.com/?p=78#comment-53347 worked for me. dunno what ur prob is JK :) worked for me. dunno what ur prob is JK :)

]]> By: JKEngineer http://blog.giveawayoftheday.com/model-analyzer-registration/comment-page-1/#comment-52855 JKEngineer Sun, 05 Apr 2009 14:05:56 +0000 http://blog.giveawayoftheday.com/?p=78#comment-52855 I have also been getting no joy trying to register this. Started with "no internet connection" and progressed to "you have not sent us an invoice". I saw Jabsoft's posting about the new code and the limited window to use it after it expired. So I am still getting "no invoice". I was not checking this everyday. I expected some more obvious announcement and a little more leeway in registering this, considering how badly the system behaved. Guess not. Please advise where to send the invoice. I will bill you for the time I wasted. JK I have also been getting no joy trying to register this. Started with “no internet connection” and progressed to “you have not sent us an invoice”. I saw Jabsoft’s posting about the new code and the limited window to use it after it expired. So I am still getting “no invoice”.

I was not checking this everyday. I expected some more obvious announcement and a little more leeway in registering this, considering how badly the system behaved. Guess not.

Please advise where to send the invoice. I will bill you for the time I wasted.

JK

]]>